Excavator operations are divided into four categories: big arm, small arm, bucket, rotation, some small machines, and a push shovel. But it doesn't really matter. In the cab, there are two operating handles, one on the left of which has two functions: rotation and forearm. The use of the left and right buttons is optional. The front and back are telescopic jibs, and the two actions of a handle on the right side are bucket and boom. The retraction buckets can be found on the left and right sides of the bucket. The lifting arms are located in the front and back, and there are two of each in the front and rear. The chain track is the only part of the trail you can walk on.

First, raise the boom and allow the jib to extend to the proper position. The bottom of the bucket is parallel to the ground, which will increase the mini excavator supplier area of friction. Then, when the lower boom and bucket make contact with the ground, stop the lower boom and begin to retract the jib. Allow the machine to move forward at the same rate as the jib is being retracted. The procedure for retracting the jib is dependent on the situation. When the jib is retracted, it will move slowly; however, this is dependent on the situation. If the big arm is properly raised, the fuselage will not come into contact with the ground even slightly. When we move forward from here, this set of actions will be completed, and then we will repeat this set of actions and move on to the next step. Throughout the process, the bottom of the bucket should be parallel to the ground, and whether or not to use the shovel teeth is determined by the condition of the road. If the action is that of pushing out the mud, the actions of pushing and retracting the small arm, as well as the direction of moving forward, are diametrically opposed. Just take a look at the hardness and softness of the mud, master the depth of the lower big arm, push and retract with the small arm and bucket, and master the forward and backward motions, OK? This is based on personal experience and emotion. Experience can be had through the senses. Perfect practice makes perfect.

There are many different types of excavators available on the market, but the most widely used type is the development and use of small excavators. The mechanical small excavator has been updated in a very short period of time, and is now extremely adaptable, with a high performance efficiency ratio and high work efficiency, which allows it to fully meet the needs of the manufacturing industry.

The following is a detailed description of the most common applications of excavators:
1. Agricultural planting, which is suitable for a large area of soil turning, digging, Mirs transformation, and other uses.

2. Rural foundation and small engineering construction, demolition, river cleaning, small tunnel construction, underground pipeline construction, and other small construction environments are all possible in rural areas.

The low cost, light weight, easy maintenance, and simple operation of the small excavator are the primary reasons for its widespread use.

Following that, I'll go over the functions of excavator 1. The best mini excavator has a powerful function and is suitable for working in a variety of conditions due to its strong structural guidance.

2. High functional diversity: Because the machine is equipped with a hydraulic system, it can be used as an auxiliary tool as well as a multi-purpose tool.
3. Operational characteristics that are distinctive. A crawler excavator is capable of working in tight spaces. Reduce the amount of damage as much as possible.
4. It is a convenient location for transportation. Because of its small size, the small excavator can be transported freely on the back of a regular small truck.

Small excavators are now available for a low cost, with prices ranging from $4000 to $18000. There are a variety of models available at various price points.